RFC1006 – Protocol
The Experior implementation of the RFC1006 protocol is not the full implementation specified in the public RFC1006 protocol specification.
We have focused on creating a simple and reliable communication protocol and the implementation has primarily been developed in order to meet the Siemens SIMATIC PLC requirements.
The RFC1006 protocol is designated ISOonTCP in a Siemens PLC. Note that the protocol specified in this manual is implemented in full by Siemens PLC network card, i.e. no user program necessary to implement this protocol.
Name – Customizable name
Id – Customizable Id
Port Number – Port used for communication between Experior and “Device”
IP Address – Type in IP address (only available if Mode = Client)
Mode – Select “Server” or “Client”
Auto Connect – Activate or Deactivate whether Experior should try to automatically connect to the “Device”
Auto Connect Delay – Set delay for when the connection will try to reconnect
Remote TSAP – Address of Remote TSAP (Transport Service Access Point)
Local TSAP – Address of Local TSAP (Transport Service Access Point)
Connection Id – Connection Id used
Max TPDU Size – TPDU (Transport Protocol Data Units) maximum size
Max TPDU Bytes – TPDU (Transport Protocol Data Units) maximum bytes used
Send Connection Request – Activate or Deactivate whether or not a connection request is to be sent
Sign Of Life – Activate or Deactivate whether or not Sign Of Life signal is to be used
Sign Of Life Interval – Set the time interval between Sign Of Life requests (only Available if Sign Of Life is checked)
Sign Of Life Timeout – Set the timeout value (only Available if Sign Of Life is checked)