< All Topics

3964R

The 3964R-Protocol is a serial point-to-point protocol for communication between two programmable logic controllers (PLC). Can be set up to use a serial (RS-232/RS-422/RS-485) or an ethernet connection.

TCP/IP Properties

  • Identification
    • Name – Customizable name
    • Id – Customizable Id
  • Validation
    • MVT – Select the MVT (Message Validation Template) being used for this protocol
  • Communication
    • Port – Port used for communication between Experior and “Device”
    • IP Address – Type in IP address (only available if Mode = Client)
    • Mode – Select “Server” or “Client”
    • Auto Connect – Activate or Deactivate whether Experior should try to automatically connect to the “Device”

Serial Properties

  • Identification
    • Name – Customizable name
    • Id – Customizable Id
  • Port Settings
    • Port Name – Select the name of the port, COM1 for example
    • Baud Rate – Select the baud rate at which to connect
    • Parity – Choose from Odd, Even, Mark or Space
    • Data Bits – Enter the number of data bits to be used
    • Stop Bits – Choose from One, Two or OnePointFive
  • Line Signals
    • DTR – Select if DTR (Data Terminal Ready) is to be used.
    • RTS – Select if RTS (Request To Send) is to be used.
    • Handshake – Choose from XOnXOff, RequestToSend or RequestToSendXOnXOff handshake protocols
  • Communication
    • Auto Connect – Activate or Deactivate whether Experior should try to automatically connect to the “Device”
Was this article helpful?
How can we improve this article?
Please submit the reason for your vote so that we can improve the article.
Previous Communications Protocols
Next Allow Siemens PLC (1200/1500) to communicate with Experior through TIA